Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Remove the Cotter Pin and Clevis Pin Inspect the Clevis Pin for wear. On high-mile 04-08 TSX, we have seen clutch petal cause wear on the pin. If it is worn, you can reuse, but plan to replace. Remove x2 M8x1.25mm nuts holding CMC to Firewall.
    • Remove the Cotter Pin and Clevis Pin

    • Inspect the Clevis Pin for wear. On high-mile 04-08 TSX, we have seen clutch petal cause wear on the pin. If it is worn, you can reuse, but plan to replace.

    • Remove x2 M8x1.25mm nuts holding CMC to Firewall.

    • Use a 12mm deep-socket (preferably on 1/4-drive rachet)

  2. Remove the x1 M6x1.0 bolt mounting reservoir to strut tower. Use a 10mm socket and extension. Remove the x1 M6x1.0 bolt mounting reservoir to strut tower. Use a 10mm socket and extension.
    • Remove the x1 M6x1.0 bolt mounting reservoir to strut tower. Use a 10mm socket and extension.

Hybrid Racing

Member since: 4/29/14

14,019 Reputation

76 Guides authored

View Statistics:

Past 24 Hours: 10

Past 7 Days: 60

Past 30 Days: 204

All Time: 2,665