You're viewing a previously published revision of this guide. View latest revision

Jul 26, 2022 - 08:07:13

Jul 26, 2022 - 08:07:45 Jul 26, 2022 - 08:07:33 Jul 26, 2022 - 08:07:42 Jul 26, 2022 - 08:07:19 Jul 26, 2022 - 08:07:17 Jul 26, 2022 - 08:07:04 Jul 26, 2022 - 08:07:57 Jul 26, 2022 - 08:07:42 Jul 26, 2022 - 08:07:25 Jul 26, 2022 - 08:07:22 Jul 26, 2022 - 08:07:54 Jul 26, 2022 - 08:07:00 Jul 26, 2022 - 08:07:29 Jul 26, 2022 - 08:07:26 Jul 26, 2022 - 08:07:41 Jul 26, 2022 - 08:07:22 Jul 26, 2022 - 08:07:13 Jul 26, 2022 - 08:07:06 Jul 26, 2022 - 07:07:52 Jul 26, 2022 - 07:07:15 Jul 26, 2022 - 07:07:21 Jul 26, 2022 - 07:07:37 Jul 26, 2022 - 07:07:43 Jul 26, 2022 - 07:07:14 Jul 26, 2022 - 07:07:32

Newer

Hybrid Racing Adjustable K-Series Thermostat Housing

Written By: Hybrid Racing

Comments: 0
Favorites: 0

Hybrid Racing Adjustable K-Series Thermostat Housing

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Hybrid Racing Adjustable K-Series Thermostat Housing

Begin the installation by removing the factory plastic thermostat neck.

Begin the installation by removing the factory plastic thermostat neck.
Remove the three 10mm bolts.
Drain all of the coolant out of the system before removing the thermostat. If you haven't, it will leak out once you remove this part.