You're viewing a previously published revision of this guide.  View latest revision

Older
Dec 17, 2019 - 09:12:41
Jan 13, 2020 - 01:01:34 Dec 17, 2019 - 12:12:37 Dec 17, 2019 - 12:12:54 Dec 17, 2019 - 09:12:47 Dec 17, 2019 - 09:12:40 Dec 17, 2019 - 09:12:33 Dec 17, 2019 - 09:12:16 Dec 17, 2019 - 09:12:43 Dec 17, 2019 - 09:12:38 Dec 17, 2019 - 09:12:28 Dec 17, 2019 - 09:12:01 Dec 17, 2019 - 09:12:29 Dec 17, 2019 - 09:12:41 Dec 17, 2019 - 09:12:21 Dec 17, 2019 - 09:12:56 Dec 17, 2019 - 09:12:07 Dec 17, 2019 - 09:12:53 Dec 17, 2019 - 09:12:30 Dec 17, 2019 - 09:12:21 Dec 17, 2019 - 09:12:01 Dec 17, 2019 - 09:12:06 Dec 17, 2019 - 09:12:19 Dec 17, 2019 - 09:12:43 Dec 17, 2019 - 09:12:18 Dec 17, 2019 - 09:12:04 Dec 17, 2019 - 09:12:29 Dec 17, 2019 - 09:12:22 Dec 17, 2019 - 09:12:50 Dec 17, 2019 - 09:12:06 Dec 17, 2019 - 09:12:09 Dec 17, 2019 - 09:12:41 Dec 17, 2019 - 08:12:12 Dec 17, 2019 - 08:12:44 Dec 17, 2019 - 08:12:39 Dec 17, 2019 - 08:12:19 Dec 17, 2019 - 08:12:56 Dec 17, 2019 - 08:12:58 Dec 17, 2019 - 08:12:24 Dec 17, 2019 - 08:12:29 Dec 17, 2019 - 08:12:07 Dec 17, 2019 - 08:12:29 Dec 17, 2019 - 08:12:15 Dec 17, 2019 - 08:12:56 Dec 17, 2019 - 08:12:40 Dec 17, 2019 - 08:12:44 Dec 17, 2019 - 08:12:03 Dec 17, 2019 - 08:12:48 Dec 17, 2019 - 08:12:40 Dec 17, 2019 - 08:12:08 Dec 17, 2019 - 08:12:46 Dec 17, 2019 - 08:12:09 Dec 17, 2019 - 08:12:33 Dec 17, 2019 - 08:12:21 Dec 17, 2019 - 08:12:27 Dec 17, 2019 - 08:12:31 Dec 17, 2019 - 08:12:28 Dec 17, 2019 - 08:12:47 Dec 17, 2019 - 08:12:49 Dec 17, 2019 - 08:12:37 Dec 17, 2019 - 08:12:22 Dec 17, 2019 - 08:12:35 Dec 17, 2019 - 08:12:46 Dec 16, 2019 - 03:12:03 Dec 16, 2019 - 03:12:20
Newer

Hybrid Racing 10-16 Honda CR-Z Short Shifter

Written By: David Cordell
  • Comments: 1
  • Favorites: 0

Difficulty

Moderate

Steps

16

Time Required

Suggest a time??

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Begin by removing the shift knob and shift boot collar. Begin by removing the shift knob and shift boot collar. Begin by removing the shift knob and shift boot collar.

    • Begin by removing the shift knob and shift boot collar.

  2. Use an interior trim tool and seperate the shift boot surround from the console. Start at the front and work your way around the sides. Once the front clips pop free, use your fingers and pull upwards. Remove the shift boot surround.

    • Use an interior trim tool and seperate the shift boot surround from the console. Start at the front and work your way around the sides.

    • Once the front clips pop free, use your fingers and pull upwards.

    • Remove the shift boot surround.

  3. Remove the plastic trim near the cup holders. Use your fingers to pry it up and the clips will pop free. Remove the four screws holding the side trims in place. Remove the four screws holding the side trims in place.

    • Remove the plastic trim near the cup holders. Use your fingers to pry it up and the clips will pop free.

    • Remove the four screws holding the side trims in place.

  4. Use your fingers to remove the dash panel from the dash. You may need to use a trim tool to separate it but use your fingers to pry. Remove the two screws holding the console sides in place.

    • Use your fingers to remove the dash panel from the dash. You may need to use a trim tool to separate it but use your fingers to pry.

    • Remove the two screws holding the console sides in place.

  5. Using your hands, remove the side console trims. Once all of the screws have been removed, they just pop off. Using your hands, remove the side console trims. Once all of the screws have been removed, they just pop off. Using your hands, remove the side console trims. Once all of the screws have been removed, they just pop off.

    • Using your hands, remove the side console trims. Once all of the screws have been removed, they just pop off.

  6. Remove the console clips. There are two on each of the front sides. Remove the console clips. There are two on each of the front sides.

    • Remove the console clips. There are two on each of the front sides.

  7. Remove the trim beneath the e-brake handle. Remove the two screws on each side of the rear console. Slide the seats forward to access. Remove the two screws on each side of the rear console. Slide the seats forward to access.

    • Remove the trim beneath the e-brake handle.

    • Remove the two screws on each side of the rear console. Slide the seats forward to access.

  8. Lift the console from the rear and slide it rearward. Lift it over the shifter and remove it from the car. Lift the console from the rear and slide it rearward. Lift it over the shifter and remove it from the car. Lift the console from the rear and slide it rearward. Lift it over the shifter and remove it from the car.

    • Lift the console from the rear and slide it rearward. Lift it over the shifter and remove it from the car.

  9. Use a flat head screw driver and remove the shifter cable C clip from the RH side cable. Turn the plastic section of the LH side cable to remove it from the shifter. Once you rotate it, start wiggling it and it will slide out. Turn the plastic section of the LH side cable to remove it from the shifter. Once you rotate it, start wiggling it and it will slide out.

    • Use a flat head screw driver and remove the shifter cable C clip from the RH side cable.

    • Turn the plastic section of the LH side cable to remove it from the shifter. Once you rotate it, start wiggling it and it will slide out.

  10. Remove the LH side shifter cable retaining clip. Remove the wiring harness from the shifter base. Remove the wiring harness from the shifter base.

    • Remove the LH side shifter cable retaining clip.

    • Remove the wiring harness from the shifter base.

  11. Use your fingers to seperate the clip on the RH side shifter cable. Push them up and apart and the cable end link will slide off the ball. Be sure to NOT remove the clip completely. If you do, do NOT lose it. Be sure to NOT remove the clip completely. If you do, do NOT lose it.

    • Use your fingers to seperate the clip on the RH side shifter cable. Push them up and apart and the cable end link will slide off the ball.

    • Be sure to NOT remove the clip completely. If you do, do NOT lose it.

  12. Remove all four shifter mounting bolts. Remove the shifter from the car.

    • Remove all four shifter mounting bolts.

    • Remove the shifter from the car.

  13. Install the Hybrid Racing shifter and use the supplied bolts to mount it directly to the chassis. It does not use any sort of base bushing. Install the Hybrid Racing shifter and use the supplied bolts to mount it directly to the chassis. It does not use any sort of base bushing. Install the Hybrid Racing shifter and use the supplied bolts to mount it directly to the chassis. It does not use any sort of base bushing.

    • Install the Hybrid Racing shifter and use the supplied bolts to mount it directly to the chassis. It does not use any sort of base bushing.

  14. Twist the shifter cable so it slides into the shifter base. Once it is in, rotate it back to lock it into place. Be sure the cable cannot slide out. Install the RH side cable and use the OE retaining C clip. You can tap it down into place. Install the RH side cable and use the OE retaining C clip. You can tap it down into place.

    • Twist the shifter cable so it slides into the shifter base. Once it is in, rotate it back to lock it into place. Be sure the cable cannot slide out.

    • Install the RH side cable and use the OE retaining C clip. You can tap it down into place.

  15. Install the RH side shifter cable end link onto the Hybrid Racing shifter. Simple place the clip on the cable and push it into the ball. It should slide on and clip into place. Make sure the ball on the shifter assembly is straight. Make sure the ball on the shifter assembly is straight.

    • Install the RH side shifter cable end link onto the Hybrid Racing shifter. Simple place the clip on the cable and push it into the ball. It should slide on and clip into place.

    • Make sure the ball on the shifter assembly is straight.

  16. Insert wisdom here.

    • Insert wisdom here.

Author

David Cordell

Member since: 8/15/18

1,178 Reputation

10 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 31

All Time: 4,816