You're viewing a previously published revision of this guide.  View latest revision

Older
Aug 14, 2014 - 01:08:33
May 13, 2015 - 05:05:16 May 13, 2015 - 05:05:56 May 13, 2015 - 05:05:31 Aug 14, 2014 - 02:08:06 Aug 14, 2014 - 02:08:59 Aug 14, 2014 - 02:08:55 Aug 14, 2014 - 02:08:28 Aug 14, 2014 - 02:08:23 Aug 14, 2014 - 02:08:44 Aug 14, 2014 - 02:08:29 Aug 14, 2014 - 02:08:14 Aug 14, 2014 - 02:08:27 Aug 14, 2014 - 02:08:07 Aug 14, 2014 - 02:08:30 Aug 14, 2014 - 02:08:58 Aug 14, 2014 - 02:08:30 Aug 14, 2014 - 02:08:56 Aug 14, 2014 - 02:08:48 Aug 14, 2014 - 02:08:35 Aug 14, 2014 - 02:08:07 Aug 14, 2014 - 02:08:49 Aug 14, 2014 - 02:08:28 Aug 14, 2014 - 02:08:34 Aug 14, 2014 - 02:08:23 Aug 14, 2014 - 02:08:12 Aug 14, 2014 - 02:08:00 Aug 14, 2014 - 02:08:15 Aug 14, 2014 - 02:08:18 Aug 14, 2014 - 02:08:05 Aug 14, 2014 - 02:08:08 Aug 14, 2014 - 01:08:33 Aug 14, 2014 - 01:08:27 Aug 14, 2014 - 01:08:49 Aug 14, 2014 - 01:08:41 Aug 14, 2014 - 01:08:37 Aug 14, 2014 - 01:08:38 Aug 14, 2014 - 01:08:50 Aug 11, 2014 - 03:08:56 Jul 30, 2014 - 11:07:34 Jul 29, 2014 - 02:07:38 Jul 29, 2014 - 02:07:36
Newer

Hondata FlashPro Install

Written By: Hybrid Racing
  • Comments: 3
  • Favorites: 0
  • Completions: 2

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Begin by going to Hondata.com and downloading the latest version of Flashpro Manager.

    • Begin by going to Hondata.com and downloading the latest version of Flashpro Manager.

    • Click on the Flashpromanager link on the Flashpro page to start the download.

    • http://hondata.com/flashpro.html

  2. Locate the OBD2 port below the dashboard on the driver side. Plug your Flashpro into the port. Switch on the ignition but do not start the engine. This will send the vehicle information to the Flashpro that you will need to lock the Flashpro to your ECU.

    • Locate the OBD2 port below the dashboard on the driver side.

    • Plug your Flashpro into the port.

    • Switch on the ignition but do not start the engine. This will send the vehicle information to the Flashpro that you will need to lock the Flashpro to your ECU.

Author

Hybrid Racing

Member since: 4/29/14

14,019 Reputation

76 Guides authored

View Statistics:

Past 24 Hours: 7

Past 7 Days: 47

Past 30 Days: 217

All Time: 32,681