Skip to main content
  1. Ensure the o-ring is installed evenly and is not damaged.
    • Ensure the o-ring is installed evenly and is not damaged.

    • Drain engine coolant enough so the remaining level is lower than the upper radiator hose.

    • Disconnect the upper rad hose from the engine thermostat housing.

    • Remove the three 10mm M6 bolts that hold the housing in place.

    • Install the Hybrid Racing thermostat and torque bolts to 9ftlb.

Finish Line

Hybrid Racing

Member since: 04/29/2014

12,413 Reputation

67 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 8

All Time: 214