Changes to Step #8

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Shorten the throw
-[* 5] First, loosen the binding nut on the post with the 17mm wrench while holding the post with a 12mm wrench. Next, extend the length of the end-link by threading out the post as illustrated by the orange arrow in the first image.
+[* 3] First, loosen the binding nut on the post with the 17mm wrench while holding the post with a 12mm wrench. Next, extend the length of the end-link by threading out the post as illustrated by the orange arrow in the first image.
[* 1] Tighten the binding nut to the post once the desired length is reached.
[* 10] To shorten the throw you will need an open-ended 17 and 12mm wrench.