Changes to Step #8
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Final |
|---|---|
| + | [* 1] This is the end of the instructions. |
| + | [* 1] You can use as many or as few springs as you choose, there is not BEST solution. The BEST solution is the one that suits your preference. |
| + | [* 1] You should be happy with the way your car shifts, changing these springs gives you the ability to change it up. |
| + | [* 9] Use a torque wrench and tighten to 16 lbf-ft (29 N-m / 3.0 kgf-m). Do NOT over tighten as the bolts will break. |