Changes to Step #9
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Shifter Installation |
| + | [* 1] Reinstall the shifter cables. |
| + | [* 1] Tap the retaining clip down into place, make sure the clip touches the top of the cable. It isn't necessary for the clip to rest on the top of shifter. |
| + | [* 1] Rotate the left side cable and slide it into place. Rotate it counter clockwise to lock it into the shifter. It should not slide out. |
| + | [* 11] If you are using the Hybrid Racing shifter cables, use the supplied (in cable packaging) retaining clip and secure the left side shifter cable. Use the OE clip on the right side cable. |