Changes to Step #16

Edit by David Cordell —

Edit approved by David Cordell

Before
After
Unchanged

Step Lines

[title] Disconnect Shifter Cables
-[* 1] Remove the cables from the factory shifter.
+[* 9] Remove the cables from the factory shifter. This can be tricky so take one cable at a time. It spins and then slides upwards out of the shifter.
[* 1] Pull the LH side retaining ring and slide the cable off the pin.
[* 1] The lower cable retaining ring must be pulled apart and then you can slide the cable end link off the shifter ball.