Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Identify Hardware Combination |
|---|---|
| + | [* 1] Your shifter assembly comes with a pack of hardware. The hardware combination you use will depend on which type of shift linkage you are installing the shifter on. |
| + | [* 2] Use these parts to mount the shifter base to the D-Series & B16A ( US & JDM) linkage. x3 M6x1 nylon locking nuts, x3 M6x1x18MM, x2 M8 Flat Washer, x1 M8x1.25x50MM, x1 M8x1.25 nylon locking nut. |
| + | [* 6] Use these parts to mount the shifter base to the B18 & B16B ( US & JDM) linkage. x3 M6x1 nylon locking nuts, x3 M6x1x18MM, x2 M8 Flat Washer, x1 M8x1.25x60MM, x1 M8x1.25 nylon locking nut & stainless steel pivot spacer. |
| + | [* 10] You will only use one of the long bolts. If you do not understand what bolts to use, please call us. 225-932-9588 |
Image 1
No previous image
Added
Image 2
No previous image
Added