Changes to Step #22
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Slide the shifter cable into the shifter base and secure it using the supplied shifter cable C clip. |
| + | [* 1] Install the cable end onto the shifter cup. Make sure to snap it in place and be sure the metal retaining clip is secure. |
| + | [* 1] Repeat the same steps on the LH side of the shifter. Install the cable using the supplied clip, then slide on the cable end securing it with the retaining pin. |