You're viewing a previously published revision of this guide. View latest revision

May 28, 2021 - 12:05:23

May 28, 2021 - 01:05:33 May 28, 2021 - 01:05:21 May 28, 2021 - 01:05:04 May 28, 2021 - 01:05:58 May 28, 2021 - 01:05:50 May 28, 2021 - 12:05:15 May 28, 2021 - 12:05:50 May 28, 2021 - 12:05:39 May 28, 2021 - 12:05:26 May 28, 2021 - 12:05:23 May 28, 2021 - 12:05:23 May 28, 2021 - 12:05:55 May 28, 2021 - 12:05:30 May 28, 2021 - 12:05:27 May 28, 2021 - 12:05:47 May 28, 2021 - 12:05:37

Newer

Hybrid Racing High-Flow B-Series Fuel Rail

Written By: Hybrid Racing

Comments: 1
Favorites: 0

Hybrid Racing High-Flow B-Series Fuel Rail

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Hybrid Racing High-Flow B-Series Fuel Rail

This fuel rail is not compatible with the OEM Honda banjo / damper bolt, so you must replace the fuel line to use a -6AN or -8AN line.

The Hybrid Racing fuel rail has two -8ORB ports. One on each end. The side with the logo etching is the feed side and should be connected to a fuel filter which is the fuel FEED.
This fuel rail is not compatible with the OEM Honda banjo / damper bolt, so you must replace the fuel line to use a -6AN or -8AN line.

Step 2

The center section of the fuel rail has a 1/8th NPT port. This port is intended to be used as a location for a fuel pressure gauge.

If you do not use a fuel pressure gauge, you can simply install the provided plug.

The center section of the fuel rail has a 1/8th NPT port. This port is intended to be used as a location for a fuel pressure gauge.
If you do not use a fuel pressure gauge, you can simply install the provided plug.
Be sure to use a dab of fuel-safe sealant on this thread to prevent leaks.