Difficulty
Easy
Steps
5
Time Required
01:00:00
- Door Hinges 5 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
Tools
Parts
-
-
Using the OEM front hinges on the rear door allows the rear door to open further. This creates more room for loading long object into the rear of the cab.
-
-
-
There are two small covers. One behind the door hand and the other in the door pocket.
-
The cover behind the handle has a tab on the top that must be depressed before it can be removed.
-
Use a thin interior panel removal tool to pull out the cover ion the door pocket.
-
The three screws can be removed with a Philips screw driver.
-
-
-
Once the three screws in the previous step are removed, the door panel is only held in the clips.
-
To disengage the clips, take a wider interior panel removal tool and pry along the bottom of the door panel.
-
Once the door panel is removed at the bottom, push or pull up on the panel. This will disengage the clips at the top of the panel.
-
Note: There will be two cables for the door handle and one electrical connector for the window switch.
-
-
-
To remove handle, unhook it from the door panel. It is NOT necessary to remove the cables.
-
-
-
The speaker must be removed in order to remove and install the door striker/stop.
-
Remove Philips head bolt.
-
Pull up on speaker to disengage hooks at the bottom.
-
Pinch at the sides of the electrical connector and pull.
-
