HYB-LTT-01-01

Written By: Hybrid Racing
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Make sure the pin valve is at the top when installed. Do not install it upside down; otherwise, air will get trapped, and it will not bleed properly.

    • Make sure the pin valve is at the top when installed. Do not install it upside down; otherwise, air will get trapped, and it will not bleed properly.

    Edit

  2. Confirm rubber gasket is oriented correctly. The nipples on the rubber gasket should face the same direction as the spring.

    • Confirm rubber gasket is oriented correctly.

    • The nipples on the rubber gasket should face the same direction as the spring.

    Edit

  3. Make sure the pin valve is at the top. Do not install it upside down.

    • Make sure the pin valve is at the top. Do not install it upside down.

    • Torque bolts to 8.7lb ft.

    Edit

  4. Make sure the pin valve is at the top. Do not install it upside down.

    • Make sure the pin valve is at the top. Do not install it upside down.

    • Torque bolts to 8.7lbft.

    Edit

  5. Make sure the pin valve is at the top. Do not install it upside down.

    • Make sure the pin valve is at the top. Do not install it upside down.

    • Torque bolts to 8.7lbft.

    Edit

  6. Make sure the pin valve it at the top. Do not install it upside down.

    • Make sure the pin valve it at the top. Do not install it upside down.

    • This is for the L15B7 engine only.

    • Torque bolts to 9lbft.

    Edit
Finish Line

Author

Hybrid Racing

Member since: 04/29/2014

10,331 Reputation

60 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 21

All Time: 83