Looking to swap my 1990 accord with a J35A8 and can’t find much help on where to start from reading the forms, besides that Hasport are ones to go to after reading several forms.
Is this a good question?
I put a j30 in a crx and used the hasport mounts. hasport had a instruction guide i emailed them and got it was really helpful. basically, had to cut one stock mount out and weld a new one in. and i cut a little of the subframe for the bell housing to fit. i imagine an accord has a little more room though.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 10
