Pending Edits to LSD Install on K-Series Transmission
Step #5 edited: [Step edited]
Edited by Anthony Dawson (1)
(You don’t have enough reputation to patrol this edit.)
| [title] Remove Flange bolts | |
| - | [* 1] Using a 12mm socket, remove all of the 8mm flange bolts that hold the two |
| + | [* 1] Using a 12mm socket, remove all of the 8mm flange bolts that hold the two halves of the transmsission together. These 17 bolts are REVERSE THREAD. |
| [* 11] All of the bolts should be loosened in several steps before any are removed. The bolts should be loosened in a criss-cross patern to avoid uneccessary stress on the bolts that are still tight. | |
| [* 10] ''Reassembly Tips: First install and hand tighten all of the flange bolts. Then torque the flange bolts to 20 ft-lb (27 N-m) in a criss cross patern.'' |