Site Navigation

Your Account

Choose Language

Begin by removing the shift knob & locking nut. (if equipped) Begin by removing the shift knob & locking nut. (if equipped) Begin by removing the shift knob & locking nut. (if equipped)
  • Begin by removing the shift knob & locking nut. (if equipped)

Add Comment

Gently pry the shift boot console upwards. Remove it completely. Gently pry the shift boot console upwards. Remove it completely. Gently pry the shift boot console upwards. Remove it completely.
  • Gently pry the shift boot console upwards. Remove it completely.

Add Comment

Gently unsnap the rear section of the console and remove it to expose the shifter assembly. Remove the two mounting screws. Remove the two mounting screws.
  • Gently unsnap the rear section of the console and remove it to expose the shifter assembly.

  • Remove the two mounting screws.

Add Comment

Pull down on the passenger side lower dash panel to expose the center console mounting clips. Remove the mounting clips on both sides of the center console. Be sure to save the clips, you will need them for reassembly.
  • Pull down on the passenger side lower dash panel to expose the center console mounting clips.

  • Remove the mounting clips on both sides of the center console.

  • Be sure to save the clips, you will need them for reassembly.

Add Comment

Remove the two mounting screws located inside of the center console compartment. Once all of the screws have been removed, pull the entire console backwards.
  • Remove the two mounting screws located inside of the center console compartment.

  • Once all of the screws have been removed, pull the entire console backwards.

Add Comment

Once the shifter assembly has been fully exposed, remove the 3 mounting bolts. Once the shifter assembly has been fully exposed, remove the 3 mounting bolts. Once the shifter assembly has been fully exposed, remove the 3 mounting bolts.
  • Once the shifter assembly has been fully exposed, remove the 3 mounting bolts.

Add Comment

Push the metal base out of the rubber bushing. Push the metal base out of the rubber bushing.
  • Push the metal base out of the rubber bushing.

Add Comment

Remove the rubber insert. Remove the rubber insert.
  • Remove the rubber insert.

Add Comment

Install the aluminum base bushing using the supplied hardware. Re-assembly is the reversal of removal. Follow this guide in reverse to finish the job! Re-assembly is the reversal of removal. Follow this guide in reverse to finish the job!
  • Install the aluminum base bushing using the supplied hardware.

  • Re-assembly is the reversal of removal. Follow this guide in reverse to finish the job!

Add Comment

Finish Line

Hybrid Racing

Member since: 04/29/2014

3,237 Reputation

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 14

Past 30 Days: 99

All Time: 3,279