Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Before you begin, unbox and locate all of the parts in the K-Swap Cold Air Intake kit.
    • Before you begin, unbox and locate all of the parts in the K-Swap Cold Air Intake kit.

    • x1 Intake tube, x1 3 inch velocity stack with dry element filter, x1 valve cover breather, x1 stainless t-bolt clamp, x1 mounting clamp, x1 lower mounting bracket & hardware pack.

  2. This kit fits all 92-00 Honda Civic & 94-01 Integra frames. Under the LH side frame rail, located the threaded hole. Using the supplied hardware, bolt the bracket to the threaded hole in the frame.
    • This kit fits all 92-00 Honda Civic & 94-01 Integra frames. Under the LH side frame rail, located the threaded hole.

    • Using the supplied hardware, bolt the bracket to the threaded hole in the frame.

    • Use the remaining hardware to connect the mounting clamp to the bracket. Do not tighten at this time.

David Cordell

Member since: 8/15/18

1,178 Reputation

10 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 14

Past 30 Days: 106

All Time: 8,666