<![CDATA[Hybridracing - Answers]]> https://guides.hybrid-racing.com/Answers?rss=yes en-US Wed, 15 Apr 2026 00:47:03 -0700 <![CDATA[cooling: Cooling question with oem style K Swap]]> Hello, i'm swapping a k20a3 into a 99 ek hatch, i've got almost everything figured out minus cooling. I am running an oem ecu and wiring harness, i know the b/d coolant temp sensors are different from k coolant temp sensors. my question is what exactly should i run sensor wise? The hybrid racing K Swap sensor seems to be the answer but i'm unsure where to install since i don't want to delete my icav. Thank you very much. - Garrett

]]> https://guides.hybrid-racing.com/Answers/View/135/Cooling+question+with+oem+style+K+Swap https://guides.hybrid-racing.com/Answers/View/135 Mon, 30 Mar 2026 16:52:39 -0700 <![CDATA[Engine: K series 74mm throttle body instructions]]> Hello, i have been looking for a k series 74mm throttle body with cruise control for my rsx for years. I have finally found one but cannot find instructions for installation to save my life. I have it 95% installed, but I'm having trouble hooking up the cables. Any chance you have an instruction manual for this?

]]> https://guides.hybrid-racing.com/Answers/View/134/K+series+74mm+throttle+body+instructions https://guides.hybrid-racing.com/Answers/View/134 Sun, 22 Mar 2026 14:34:11 -0700 <![CDATA[Electronics: K20 ef conversionn harness]]> Any diagram on how to install conversion harness in 1991 crx si

]]> https://guides.hybrid-racing.com/Answers/View/133/K20+ef+conversionn+harness https://guides.hybrid-racing.com/Answers/View/133 Sat, 28 Feb 2026 16:43:47 -0700 <![CDATA[Electronics: 2002 Accord K24 in a 1998 EK Chasis]]> Hi Hybrid Racing Team,

I’m planning a K-series swap into a 1998 Civic EK using a 2002 Honda Accord K24A automatic engine.

I have a few questions before I order parts:

  1. Auto K24 Compatibility
    • For an automatic-equipped 2002 Accord K24A (A4), do you recommend any specific changes or parts for manual swap compatibility (besides the transmission and mounts)?
    • Are there known issues with using the auto motor harness or sensors on a manual swap?
  2. Preconfigured Wiring Harness
    • Do you offer a preconfigured plug-and-play wiring harness designed to work with an Accord K24A from an automatic car into a manual-swapped EK chassis?
    • If not, can you recommend a harness option (Rywire, HR, or other) that integrates cleanly with your engine management solution?
  3. ECU / Engine Management Recommendations
    • Which ECU/harness combination do you recommend for the Accord K24 that’s easiest for a manual swap and future tuning (street/daily)?
    • Is wiring for a Hondata KPro ECU supported/configurable through your wiring options?
  4. Optional Sensors / Adapters
    • Are there any sensors, actuators, or adapter harnesses needed (crank, cam, VSS, TPS, etc.) to make the auto K24 engine run correctly on a manual swap with your harness?
  5. Support & Documentation
    • Do you have wiring diagrams or pin-outs for your harness solutions specific to this swap scenario?

Thanks in advance,
Josh

]]> https://guides.hybrid-racing.com/Answers/View/132/2002+Accord+K24+in+a+1998+EK+Chasis https://guides.hybrid-racing.com/Answers/View/132 Wed, 25 Feb 2026 08:41:12 -0700 <![CDATA[Electronics: guide for universal kswap harness]]> where can I find a guide for you universal kswap harness? I just received mine and don't see a guide

]]> https://guides.hybrid-racing.com/Answers/View/131/guide+for+universal+kswap+harness https://guides.hybrid-racing.com/Answers/View/131 Tue, 11 Nov 2025 10:06:38 -0700 <![CDATA[Drivetrain: Detent Springs for a 16-21 work on a 24]]> So it’s not very clairvoyant on the fitment, will the ‘16-‘21 detent springs work in the ‘24 manual transmission

]]> https://guides.hybrid-racing.com/Answers/View/130/Detent+Springs+for+a+16-21+work+on+a+24 https://guides.hybrid-racing.com/Answers/View/130 Fri, 20 Jun 2025 19:27:52 -0700 <![CDATA[Electronics: Is the K pro V4 both PND and PRB?]]> I recently bought an ecu and I was wondering if it was the full 02-04 rsx type s prb version, or the pnd. Would love to have that clarified, thank you!

]]> https://guides.hybrid-racing.com/Answers/View/129/Is+the+K+pro+V4+both+PND+and+PRB https://guides.hybrid-racing.com/Answers/View/129 Sat, 26 Apr 2025 06:57:58 -0700 <![CDATA[Drivetrain: 1994 civic hatch k- swap]]> how do i run my shifting cables too my short shifter under the car

i have looked up and down on the website i might be over looking it

please help im ready to have my swap on the road

⟐ Commented April 14, 2025, 17:39 MST

]]> https://guides.hybrid-racing.com/Answers/View/128/1994+civic+hatch+k-+swap https://guides.hybrid-racing.com/Answers/View/128 Mon, 14 Apr 2025 17:39:12 -0700 <![CDATA[Drivetrain: 1997 Honda Prelude hybird shift cable installation guide]]> Hi i am trying to install my hybird racing shift cables and having issues with the transmission going into gear and I am not sure if I have installed them correctly, by any chance would you have a installation guide for my vehicle? thank you

]]> https://guides.hybrid-racing.com/Answers/View/127/1997+Honda+Prelude+hybird+shift+cable+installation+guide https://guides.hybrid-racing.com/Answers/View/127 Wed, 11 Dec 2024 13:31:36 -0700 <![CDATA[Engine: K Series Fuel Rail Inlet/Outlet]]> Can I use either side of the HR K-series fuel rail as the feed? Or is there a specific inlet and outlet port?

]]> https://guides.hybrid-racing.com/Answers/View/126/K+Series+Fuel+Rail+Inlet-Outlet https://guides.hybrid-racing.com/Answers/View/126 Wed, 20 Nov 2024 19:21:25 -0700 <![CDATA[Drivetrain: Do you make shifter cables that fit an Accord k24 transmission?]]> I have a 5 speed transmission out of a 05 Accord. Do you make shifter cables that can work with this setup?

⟐ Commented September 18, 2024, 6:21 MST

]]> https://guides.hybrid-racing.com/Answers/View/13/Do+you+make+shifter+cables+that+fit+an+Accord+k24+transmission https://guides.hybrid-racing.com/Answers/View/13 Wed, 18 Sep 2024 06:21:36 -0700 <![CDATA[Accessories: Need to know what ac pressure switch you used on the a civic k20 eg]]> What pressure switch do you use on this K20 swap on a eg cause mine is not working

]]> https://guides.hybrid-racing.com/Answers/View/125/Need+to+know+what+ac+pressure+switch+you+used+on+the+a+civic+k20+eg https://guides.hybrid-racing.com/Answers/View/125 Fri, 26 Jul 2024 17:47:50 -0700 <![CDATA[Rebuild whole car: Replacing the clutchline video]]> Hello. So I ordered a new clutch line for my aftermarket hybrid racing clutch that's in my 2008 Honda Civic si. I was wondering if there was a video I could watch on how to install the line properly.

]]> https://guides.hybrid-racing.com/Answers/View/124/Replacing+the+clutchline+video https://guides.hybrid-racing.com/Answers/View/124 Tue, 23 Apr 2024 16:21:14 -0700 <![CDATA[Electronics: What does rvsl stand for]]> Stupid question whar does the rvsl on the wiring harness stand for lol I feel stupid asking this

⟐ Answered March 28, 2024, 20:30 MST

]]> https://guides.hybrid-racing.com/Answers/View/75/What+does+rvsl+stand+for https://guides.hybrid-racing.com/Answers/View/75 Thu, 28 Mar 2024 20:30:10 -0700 <![CDATA[Electronics: 1996 ek civic conversion harness install]]> is the 99-00 installation guide for the conversion harness the same for 1996 ek because i cant find the a connector on my car?

⟐ Answered March 28, 2024, 6:38 MST

]]> https://guides.hybrid-racing.com/Answers/View/112/1996+ek+civic+conversion+harness+install https://guides.hybrid-racing.com/Answers/View/112 Thu, 28 Mar 2024 06:38:27 -0700 <![CDATA[Engine: J35A8 swap 90 accord]]> Looking to swap my 1990 accord with a J35A8 and can’t find much help on where to start from reading the forms, besides that Hasport are ones to go to after reading several forms.

⟐ Answered March 28, 2024, 6:35 MST

]]> https://guides.hybrid-racing.com/Answers/View/116/J35A8+swap+90+accord https://guides.hybrid-racing.com/Answers/View/116 Thu, 28 Mar 2024 06:35:16 -0700 <![CDATA[Electronics: Witch harness setup do I run in my chassis?]]> k24 with 5 speed manual transmission, in a nun Honda chassis, I have the 02-04 tucked engine harness, next buy is going to be the universal harness but it says it’s not compatible with k24 and ecu? going to be running the kpro aswell.

⟐ Answered March 28, 2024, 6:13 MST

]]> https://guides.hybrid-racing.com/Answers/View/119/Witch+harness+setup+do+I+run+in+my+chassis https://guides.hybrid-racing.com/Answers/View/119 Thu, 28 Mar 2024 06:13:48 -0700 <![CDATA[Drivetrain: Are there any parts for 2006 Honda accord/ I know it is compatible wit]]> Are there any parts for 2006 Honda accord/ I know they should be compatible with 08 tsx but not sure what would fit. Actually looking for master slave cylinder

]]> https://guides.hybrid-racing.com/Answers/View/118/Are+there+any+parts+for+2006+Honda+accord-+I+know+it+is+compatible+wit https://guides.hybrid-racing.com/Answers/View/118 Sat, 04 Nov 2023 20:54:37 -0700 <![CDATA[Engine: 85 chevy sprint k20a swap]]> I was wondering if anyone would know if a k20a would fit in the engine bay? I know modification will be required if it would fit.

]]> https://guides.hybrid-racing.com/Answers/View/117/85+chevy+sprint+k20a+swap https://guides.hybrid-racing.com/Answers/View/117 Thu, 26 Oct 2023 16:14:50 -0700 <![CDATA[Engine: Question about k20a engine swap for 94-01 integra]]> How much would it cost to put a k20a into a 94-01 integra?

Would that swap be possible ?

Would you guys be able to do it , and if so how much for parts and the engine plus labor?

]]> https://guides.hybrid-racing.com/Answers/View/115/Question+about+k20a+engine+swap+for+94-01+integra https://guides.hybrid-racing.com/Answers/View/115 Tue, 05 Sep 2023 02:29:51 -0700