Hybridracing - Active Questions

Ek kswap k20z3 with k20a2 tranny: How to adjust hybrid cable for the tranny

Sun, 04 Jun 2023 11:41:21 -0700

I dont know how to adjust the cable hybrid racing on my tranny . I have a ek4 with k20z3 and a k20a2 tranny

⟐ Commented June 04, 2023, 11:41 MST

Electronics: How to ground fuel pump properly when using non-OEM hanger?

Wed, 24 May 2023 11:38:44 -0700

I had a question for you guys, so I’m doing a k20a2 swap on my 99 ek civic and I got your guys fuel pump (335) all set up and I am running a aftermarket hanger kit that converts to AN fittings. So I have the plug hooked up to the pump and the red and black wires coming out. can I splice both ground wires together outside the tank and run a exterior ground or do I need a ground on the outside and inside of the tank like the factory setup?

⟐ Answered May 24, 2023, 11:38 MST

Electronics: EM2 - ep2 kswap harness how to convert from wideband to narrow band

Mon, 13 Feb 2023 05:31:30 -0700

I have a Ep2 kswap with a k20a2 and the hybrid racing conversion harness, the 02 sensor are currently the uk oem narrow-band, the conversion harness is wired for wide-band use, is there a guide to convert the harness to work the 02 sensor in narrow-band

Electronics: Can I have the instructions to the 1988-1991 civic crx wire harnesses

Thu, 09 Feb 2023 15:28:48 -0700

I need the instructions to the 1988-1991 civic wire harness steps

Drivetrain: 06 civic si coupe transmission compatible with 05 rsx type s manshaft

Sat, 21 Jan 2023 21:17:38 -0700

Hi hopefully i can get an answer as soon as i can. Im rebuilding my 06 civic si coupe transmission and all i need is a mainshaft. I couldnt find it anywhere, i found a mainshaft from a 2005 rsx type s. Im wondering if i can use the mainshaft from there and use it for my civic? Any fitment issues??? Thanks

K24a conversion: What conversion harness will I need for k24a in my 94 eg coupe

Thu, 11 Aug 2022 14:23:53 -0700

I’m looking into doing something like the YouTube video of the k24a into my 94 civic and am wondering which conversion harness, engine, harness and if I need to get kpro on a different ecu or if I can put it on mine

K-swap: What would I need to k-swap a 2002 Honda Accord lx

Sat, 18 Jun 2022 07:53:37 -0700

K-swap 2002 Honda Accord lx

Engine: K20a Swap into 98 integra

Sat, 28 May 2022 08:21:05 -0700

Just recently picked up a 98 Integra for low, have a crashed EP3 with a solid K 20 in it, is the swap possible? How much is it gonna run me

⟐ Answer accepted May 28, 2022, 8:21 MST

Electronics: Ek obd2a harness pinout

Thu, 26 May 2022 11:56:54 -0700

Hi i have a Ek 96-98 obd2a Kswap harness however i believe it maybe 1-2 pins incorrect …. i have tried it with 2x engine looms from a dc5 02-04 as i thought it was my engine loom being the problem is there a wiring diagram to check out the pins thanks V

⟐ Answered May 26, 2022, 11:56 MST

Acura TL 2006 Hybrid Racing Short Shifter Installation: Very hard to shift into gears after instatllation

Thu, 26 May 2022 11:50:56 -0700

I feel as If I use an uncomfortable amount of force to throw the car into 1-6th gear as well as reverse. Before I installed the short shifter It went into all the gears without any hitch and not as much force. Should I have lubricated the short shifter in the installation? Do I need to get new shifter cable bearings? Thanks.

⟐ Answered May 26, 2022, 11:50 MST

Drivetrain: 06-11 civic si cmc upgrade

Wed, 27 Apr 2022 10:44:27 -0700

I recently bought the cmc upgrade kit and used everything provided. I followed instructions and swapped the oem clutch rod into the new cmc and bled the system. I have 5 threads showing on the bottom on the cruise control switch and I adjusted the rod until little resistance and then half a turn back the other way. Clutch is engaging really high is this normal ?

⟐ Answer edited April 27, 2022, 10:44 MST

Electronics: Where should I run the wire for the boost solenoid

Wed, 27 Apr 2022 10:38:05 -0700

Have the conversion harness just wanted to know where to put the wire for the boost solenoid?

⟐ Answered April 27, 2022, 10:38 MST

Engine: Hybrid Racing Clutch Master Cylinder Kit - Civic FD2

Thu, 21 Apr 2022 11:40:51 -0700

I am in need of a new clutch Master cylinder for my Right hand drive FD2R (2007 Type R). will the product SKU: HYB-CMC-01-02 (Hybrid Racing Clutch Master Cylinder Kit - Civic FD2) be compatible with RHD cars? Thanks! From Potential customer

⟐ Answered April 21, 2022, 11:40 MST

Engine: K20z3 swap in a ep3

Thu, 21 Apr 2022 11:37:01 -0700

Hello I wanted to know if you can help me out i am looking to swap a k20z3 into a 2004 EP3?

⟐ Answered April 21, 2022, 11:37 MST

K swap Installation: Can I swap a K20 into my 1999 Acura Integra ls 1.8L?

Thu, 21 Apr 2022 11:36:12 -0700

I am new to the car scene. I recently purchased a 1999 Acura Integra Ls and the engine is blown. I have seen many people swap the engine with a K20A and I wanted to know how difficult it is and if a beginner could do it.

⟐ Answered April 21, 2022, 11:36 MST

Civic Si 2002 K20A2 shifter cables: Guide for installation extra springs

Thu, 21 Apr 2022 11:32:51 -0700

I installed the new Hybrid Racing Performance Shifter cables on my 2002 Civic Si K20A2 and i am extremely satisfied with it.

However, I have not installed the new springs included in the kit.

There is a tutorial about it?

Thank you

⟐ Answered April 21, 2022, 11:32 MST

Drivetrain: Are there aftermarket shifter cables available for the TSX?

Thu, 21 Apr 2022 11:31:32 -0700

I am in the process up upgrading all parts relating to the clutch + shifter on my K24A2 2004 TSX 6MT. The master/slave, shifter assembly, base bushings, cable bushings, detent and shifter springs have all been upgraded with performance parts. Now I need a pair of Street or Race Spec shifter cables. What options if any are available for the TSX? I find it hard to believe that Honda OEM would be my only option since so many parts are interchangeable between the TSX/Accord/RSX/Civic si.

Thanks!

⟐ Answered April 21, 2022, 11:31 MST

Drivetrain: Hybrid racing RSX V3 shifter into 96-98 Civic EK

Thu, 21 Apr 2022 11:30:12 -0700

was wondering how installing the rsx v3 shifter into the civic ek with heater core still installed would be done. like where to make the holes for the shifter cables to go through.

⟐ Answered April 21, 2022, 11:30 MST

Electronics: Can I have a step by step for my HYB-CWH-01-07 harness please 91crx

Thu, 21 Apr 2022 11:28:09 -0700

Where can I find instructions for my crx jumper Kswap harness? Thanks!

⟐ Answered April 21, 2022, 11:28 MST

Engine: Does an optima battery work with the RSX Intake?

Fri, 04 Feb 2022 01:18:37 -0700

I have an optima battery and would like to know if it will work with the RSX Intake battery relocation bracket?

⟐ Commented February 04, 2022, 1:18 MST