Hybridracing - Answers

Engine: looking for 9th gen fuel line tuck installation.

Thu, 02 Dec 2021 14:24:40 -0700

I cant seem to find an installation guide for the tucked fuel line for the 9th gen civics.

Engine: K24z3/k20z3 swap in a rsx?

Tue, 30 Nov 2021 05:45:32 -0700

is it possible to make this swap in a RSX, will everything bolt up?. what would I need to make the swap happen?. Is it even worth it, or should I just bolt up the SI head to my RSX block(A3). Is the transmission compatible?, I have heard the crank sensors are positioned differently from one another. Other than that I have heard you have to cut into the crank case, but again not sure. I appreciate your advice and time in advance.

Warranty: Hybrid dipstick won't lock down

Wed, 17 Nov 2021 15:03:54 -0700

Bought a hybrid dipstick and it was stuck on the valve cover and would not unlock got it to unlock but now I can't get it to lock, it's like the lock mechanism is broken

⟐ Edited by author November 17, 2021, 15:03 MST

K swap fuel: How to run fuel setup

Thu, 28 Oct 2021 17:38:23 -0700

Hi guys hope all is well. While doing my K24 boost project I see people run their fuel to the rail in many different ways and honestly it’s a bit confusing. I see coming in from passenger side and out the driver to regulator then to return or just in from the middle from regulator and out to return. I’m lost as to what’s the best option. Please help

Electronics: My client ordered the 96-98 k sub harness and the vehicle is a 99-00.

Fri, 08 Oct 2021 01:37:25 -0700

I am very proficient in wiring can you just send me the differences so i can mod accordingly please.

⟐ Answered October 08, 2021, 1:37 MST

Engine: k24a a/t swap into a 2005 civic sedan

Wed, 25 Aug 2021 22:32:28 -0700

is it possible to drop in a k24 from an 03-05 honda accord a/t to a 04/05 civic ex sedan?

Engine: HR FPR boost friendly?

Sat, 21 Aug 2021 18:30:56 -0700

Hello. Like the title says, is the hybrid racing fuel pressure a rising rate regulator to support boosted applications. I see it has the nipple for vac/boost. I currently am using it on my k24 93 civic with your tuck fuel line kit with deadhead setup and im going to turbo it. Thanks for any input.

K swap: K20z1 in 03 Rsx type s

Sun, 25 Jul 2021 17:39:43 -0700

Hello I swapped a 05 Rsx type s k20z1,engine harness, ecu, fuel pump relay and immobilizer into a 03 type s. My issue is the key light won’t come on nor the fuel pump is priming. Can your immobilizer bypass fix my issue?

my ecu is a prb13

K20a swap into 97 integra ls: What is everything I would need for K20a swap into my 97 integra

Fri, 23 Jul 2021 21:23:24 -0700

I’m looking to swap a k20a4 into my 97 integra ls but I’m not sure exactly what I would need. I would also like to know what I would need to pass smog in California if possible

Cables: ‘07 Si Shift Cables...

Wed, 14 Jul 2021 21:45:48 -0700

My som has an RSX type-S transmission. Which shift cable goes to which position on the shift selector? I would like to send a photo of his setup to someone there so there’s not any guessing. Is there someone I can call/text?

K-swap guide: K-swap Prelude tips and tricks

Mon, 07 Jun 2021 13:52:50 -0700

I am looking to K-swap my 99 Prelude sometime in the future as the next iteration of this car and see that information is still relatively scarce. Could anyone point me in a good direction for some good guides, parts lists (specific to Prelude if possible), personal experiences, tips and tricks, etc? I think after dealing with this Type SH for so many years, I just think it is time to move on to a stronger and more reliable platform. Thanks in advance for everything!

Note: I have downloaded the K-swap guide from here already, really looking for Prelude specific tips if at all possible to help on that front. I’m also thinking about using the K24 platform since it seems to have little better low/mid-range torque and the 5th gen Prelude is a little on the heavy side of things. I want to pair to something 6-speed with LSD if at all possible and think I can source a trans from a k20 07+ civic Si.

⟐ Edited by author June 07, 2021, 13:52 MST

Hybrid Racing Universal K-Series Swap Conversion Wiring Harness: Where do I find pinout for diagram

Tue, 01 Jun 2021 10:41:59 -0700

Looked all over the website , i have the universal dash harness i purchased from you guys and a rwd kmiata engine harness. I notice one pin doesnt line up between the joining connector. Also i would like to wire up the relays and find out which wires do what. K24 into a ae86 with a s2000 cluster

thank you for your time

Engine: Available Swap kit packages

Thu, 27 May 2021 12:21:36 -0700

Do you offer a full turnkey k20 swap kit that allows me to keep my a/c and power steering for a 94 civic? I’m running the k20z1 if that helps.

⟐ Answered May 27, 2021, 12:21 MST

Engine: DA9 K24 Will it work?

Wed, 19 May 2021 23:21:43 -0700

i’ve seen people k20swap the DA9 chassis my question is why isn’t there anyone with a k24 DA9? will there be fabrication required? I know you’d have to remove the trans mount for the k-swap mount kit by Hasport which isn’t an issue.

⟐ Answered May 19, 2021, 23:21 MST

K-Swap AC Intall Kit: 96-00 Civic K-Swap A/C Relay Wiring

Sun, 18 Apr 2021 14:40:49 -0700

Hi,

I currently have a K-Swap 1997 EK Civic and have the 96-00 Civic A/C Install kit. I have read the instructions on the product, but the relay that came with the 96-00 Civic A/C Install Kit didn’t come in the same wire colors. The colors in the picture and stated in the instructions are Red, Blue, Yellow, and Green. But the relay from the kit looks like the relay from the 92-93 Civic & Del Sol A/C Install kit. Wire colors are White, Blue, Yellow, Black, and a small Yellow wire pin connector. So I’m not sure if I got the wrong relay in my kit or if I just need to wire the relay differently from the instructions on my kit.

K-Swap Installation: Would you do swaps in house?

Sat, 27 Feb 2021 22:18:23 -0700

I have a 1995 Honda Civic VX that I’d like to do a K-swap with. My apartment wouldn’t be happy seeing me working on the car so I’m looking for someone reliable to do the install. The site seems to have every part I would potentially need but all I need is a mechanic. If that’s a service you could offer could you reach out to me?

⟐ Edited by author February 27, 2021, 22:18 MST

K-swap: K20z3 Head with K24z3 (Tsx) block

Thu, 14 Jan 2021 11:56:56 -0700

Have both a K20Z3 Head and K24Z3 (Tsx) block sitting around and was wondering if i can slap them together.

Electronics: Can I use the z1 transmission in my 93 EG SI?

Wed, 15 Jul 2020 08:55:12 -0700

I have a full k20z1 swap out of a 05 rsx type s, I am wondering what wiring and ECU I need in order to use this motor/transmission. I am reading that there is a high frequency and a low frequency.

⟐ Answered July 15, 2020, 8:55 MST

Engine: How to install 3.5 inch Civic Si intake on fn2

Mon, 08 Jun 2020 08:32:15 -0700

what modifications are needed to install this intake?

https://www.hybrid-racing.com/products/8...

⟐ Answered June 08, 2020, 8:32 MST

K swap guide: Can you give me a swap parts list of mounts wire harness charge harnes

Mon, 08 Jun 2020 08:31:37 -0700

2000 em1 si , just need a run down of parts to swap k24a2 into it,

⟐ Answered June 08, 2020, 8:31 MST